Huilian Phase II Refining Zone Anti-corrosion coating Project
1. Shop Primers and primers
H06-1Epoxy zinc-rich shop primer (2K)
H06-1-1 Epoxy zinc-rich primer (2K)
H06-1-1 high solid epoxy zinc-rich primer(2K)
H06-1-2 Epoxy zinc powder shop primer (2K)
H06-1-3 Epoxy zinc-rich primer (3K)
H06-2 Epoxy ester red iron primer
H06-5 Epoxy over-rust primer (2K)
H53-5 Epoxy red iron shop primer (2K)
E06-1 Inorganic zinc silicate shop primer (2K)
E06-1-1 Inorganic zinc-rich primer (2K)
E06-2 Inorganic zinc silicate shop primer (2K)
X06-1 vinyl phosphating primer (2K)
S53-85 Polyurethane zinc-rich coatings (3K)
SZ-1 Waterborne zinc-rich coatings (2K)
C06-1 Alkyd red iron primer
2. Antirust Paints
C53-6 Alkyd aluminum red iron antirust paint
C53-10 Alkyd red iron antirust paint
C53-31 Alkyd red lead antirust paint
C53-34 Alkyd micaceous iron oxide antirust paint
F53-6 Phenolic aluminum red iron antirust paint
F53-7 Phenolic zinc yellow antirust paint
F53-31 Phenolic red lead antirust paint
Y53-31 Oleo resin red lead antirust paint
H53-1 Epoxy glass scale antirust paint
H53-3 Epoxy ester red iron antirust paint
H53-4 Epoxy zinc yellow antirust paint
H53-6 Epoxy micaceous iron oxide antirust paint (2K)
H53-6 high solid epoxy mica iron rust-proof paint(2K)
H53-8 Epoxy red lead antirust paint (2K)
H53-9 Novel epoxy antirust primer (2K)
H53-9 new-type light-colored epoxy rust-proof paint (2K)
H53-10 non-ferrous metal epoxy primer (2K)
H53-16 High performance epoxy high build primer (2K)
H53-30 Epoxy zinc phosphate antirust paint (2K)
J53-11 Chlorinated rubber aluminum high build antirust paint
J53-12 Chlorinated rubber red iron high build antirust paint
J53-13 Chlorinated rubber micaceous iron oxide antirust paint
J53-14 Chlorinated rubber bitumen antirust paint
J53-16 Chlorinated rubber glass scale antirust paint
J53-81 Chlorosulfonated polyethylene micaceous iron oxide antirust paint (2K)
J53-82 Chlorosulfonated polyethylene light color primer
X53-2 High chloropolyethylene red iron antirust paint
X53-3 High chloropolyethylene light color primer
X53-4 High chloropolyethylene micaceous iron oxide antirust paint
S53-81 Polyurethane red iron antirust paint (2K)
S53-82 Polyurethane micaceous iron oxide antirust paint (2K)
L01-17 Coal tar paint
F53-8 Gray phenolic antirust paint
H53-5 Epoxy red iron antirust paint
LF53-11 fluorocarbon rust-proof paint(2K)
5. Oil Tank Linings Coatings
H99-1 Oil resistant antistatic corrosion protective coatings (2K)
H52-16 solvent-free epoxy thick film tank interior wall coating (2K)
H54-32 Finished oil tank linings high build coatings (prime/topcoat, 2K)
HL54-34 Epoxy bitumen oil resistant primer (2K)
HL54-35 Epoxy bitumen oil resistant top coatings (2K)
S54-30 Polyurethane oil resistant coatings (2K)
S54-31 Polyurethane oil tank linings antistatic coatings (2K)
S54-32 color polyurethane tank interior wall anti-static coating(2K)
E54-1 Petroleum resin solution
FH99-1 phenolic epoxy anti-static anti-corrosion coating(primer/topcoat, 2K)
6. Outer Coatings for Underground Pipes
J52-5 chlorosulfonated polyethylene coatings for underground pipes (primer/topcoat, 2K)
X52-15 High chloropolyethylene pipe coatings (primer/topcoat)
HL52-3 Epoxy bitumen high build coatings (primer/topcoat, 2K)
HL52-3-1 Epoxy bitumen high build coatings (primer/topcoat, 2K)
HL52-4 Epoxy bitumen high build coatings (used at ambient temp./ in winter, 2K)
XL52-28 Vinyl bitumen coatings
7. Special Coatings
J52-3 Chlorosulfonated polyethylene corrosion protective coatings for gas tanks (primer/intercoat/topcoat. 2K)
J55-4 Chlorosulfonated polyethylene moisture-proof coatings for cooling towers (primer/topcoat, 2/3K)
J86-7 Chlorosulfonated polyethylene marking paint for sky structures (2K)
H55-8 High solid epoxy coatings for drinking water chambers (primer/topcoat, 2K)
H52-15 Epoxy high build coatings (2K)
H52-17 Epoxy high build coatings for wet substrates (2K)
LL2000 Environmental Friendly epoxy high build heavy duty coatings in cold weather (2K)
SH Acid resistant coatings (primer/intercoat/topcoat, 2K)
PN-1 Polyisocyanate cured waterproof coatings
JS 1K Polyurethane waterproof and corrosion protective coatings
B86-1 Acrylic road marking paint
BS2000 Acrylic polyurethane proprietary coatings for machinery
BS3000 construction machinery special coating(2K)
BS52-14 acrylic polyurethane orange-peel top coating(2K)
SH-3 Corrosion protective coatings for cooling towers
IPN Polymer interpenetration coatings
B86-2 Acrylic marking coatings for sky structures
PN-5 Polyisocyanate cured corrosion protective coatings
HB-2 space reflective insulation coating
LL918 new primer-finish coating
LL988 polyaspartic ester-based primer-finish coating
coal machine special primer-finish coating
epoxy primer-finish coating
polyurethane primer-finish coating
chlorinated rubber paint (primer-finish)
HW-1 solvent-free epoxy glass flake coating
HW-2 solvent-free epoxy glass flake putty
87Aium thick gray epoxy aluminum paint
H52-20 solvent-free epoxy high-build coating
H998 high solid low toxic and wear resistant epoxy primer-finish coating
oil pipe special protective coating
FH61-150 phenolic epoxy anti-corrosion coating
BS52-18 propylene bolt polyurethane vehicle top coating
BS52-20 high solids acrylic polyurethane top coating
BS53-12 acrylic polyurethane floating coating
LL-90UV fixed -steel-pipe anti-corrosion coating (varnish)
LL-91UV fixed steel-pipe anticorrosive paint (black)
8.water-based industrial coatings
WH06-1-1 water-based epoxy zinc-rich primer
WH53-3 water-based epoxy black primer
WH53-5 water-based epoxy iron red primer
WH53-6 water-based epoxy mica iron rust-proof paint
WH53-8 water-based epoxy phosphate iron red primer
SB53-12 water-based acrylic iron red primer
SC06-1 water-based alkyd prime
SC53-34 water-based alkyd mica iron rust-proof paint
SH06-2 water-based epoxy ester primer
SB52-12 water-based acrylic top coating
SC04-42 water-based alkyd enamel paint
WBS52-12 water-based acrylic polyurethane top coating
WBS918 water-based acrylic polyurethane primer-finish coating
WH998 water-based epoxy primer-finish coating
WH52-2 water-based epoxy primer
water-based acrylic primer-finish coating
water-based amino paint.
1) Good adhesion on metals (steel, aluminum), ceramics, glass, wood.
2) Excellent chemical resistance, particularly alkali resistance, and good oil resistance.
3) Hard and flexible coatings film (hard and tough).
4) Good wetting on wet surfaces, and can be applied underwater to remove the surface water for wetting. Useful for underwater application of corrosion protection of structures.
5) Outstanding electrical insulation, used for cast sealing and dipping paint.
Uses:
1) Heavy-duty coatings for steel structures and buildings.
2) Corrosion protection for ballast tank, crude oil tank, fuel oil tank, sewage tank.
3) For drinking water tank and fresh water tank in ships; containers, tanks, pipes and inner walls of warehouses in beer, beverage, pharmaceutical and tap water industries.
4) Floorings in warehouses, engine rooms, and workshops.
Composition: Composed of chlorinated rubber, pigments, plasticizer, additives and solvents.
Characteristics:
1) Fast dry, recoatable after 5-6 hr at ambient temperature.
2) No limitation for application temperature, can be applied at -20℃~+50℃.
3) Easy application with various application methods as it is usually a 1K system.
4) Easy for thick film application. It is easy to reach the required film thickness when the high-build chlorinated paint is applied by high-pressure airless spray.
5) Good durability, little changes of the film after long-term service.
6) Good corrosion protective properties. Chlorinated rubber is a inert resin, which shows lower water and oxygen permeability and good resistance to alkali, salt fog, acid, water, oxidant, corrosive gases and good weatherability.
7) Easy maintenance.
8) Good anti fungi and fire retardant properties because of high chlorine content.
9) Good adhesion with proper primers.
Uses: Used as top coatings for ships, containers, harbor machinery, and various steel structures and concrete.
Alkyd coatings consists of refined vegetable oil modified alkyd resin, pigments, driers, dispersants and solvents. The gloss, hardness and durability of the alkyd top coatings are superior to the oleoresin coatings. It also shows good decoration performance, adhesion and mechanical properties, and can be dried at ambient temperature or lower baking temperature. It provides good compatibility and adhesion with primers and can be used for outdoors steel structures, wood, and superstructures on ships.
The Chlorosulfonated Polyethylene coatings consists of chlorosulfonated polyethylene accelerator, and solvents. It is a two-component system (A and B); component B is generally a curing agent. The aluminum top coatings is a three-component system. The micaceous iron oxide primer shows good rust proof property, and paint film has good mechanical performance, fast dry, low temperature application, easy application. The top coat shows excellent weatherability and excellent resistances to acids, alkali and salts, and resistances to water, oils, heat, cold weather, and the aluminum coatings also show good radiation resistance. The paint film features good mechanical property, elasticity, and resistance to abrasion and cracking. The paint is dried fast and can be applied at low temperature. It has been widely used for chemical atmospheric corrosion protection of industry constructions, concrete walls, steel structures, pipes, storages, tanks; the interior and exterior linings of urea and ammonia pellet production towers, floorings; the surfaces of buildings, facilities, and oil tanks in petroleum, oil refinery and chemical industry; top coat for oil transportation pipes and tanks.
Lanling polyurethane coatings are based on polyisocyanates and polyester polymers, which are modified with special resin, to formulate high performance polyurethane corrosion protective coatings. It is divided into three categories: varnish, primer and top coatings, which are all 2K systems. Component A is a hydroxyl containing resin, incorporated with pigments and fillers in primers or pigmented coatings; component B is the polyisocyanate prepolymer hardener. The high build polyurethane heavy-duty coatings shows excellent comprehensive performance: good weatherability, decoration and gloss and color retention. The coatings film is featured by its good resistances to oils, water, boiling water, seawater, acids, and alkali, and heat resistance (up to 160℃); good adhesion (hard and tough), abrasion, and fast dry. It can be applied even at humid environment. It can be blended with various resins to form a variety of multifunctional coatings to meet various application requirements. This coatings has been widely used for protection on steel structures, aluminum alloys, underground pipes, gas pipes, oil tanks, storage tanks, machinery, electric motors, ships, bridges, harbors, rubbers, and concrete.
Composition: Consists of acrylic resins, plasticizer, thixotropic agent, anti-settlement agent, pigments and fillers, and solvents. It dries by evaporation of the solvents.
Advantages:
1) Excellent weatherability, outdoor durability is far superior to nitrocellulose, alkyds and vinyl coatings products.
2) Excellent color and gloss retention under UV light, water white color, semigloss.
3) Good resistances to chemicals, water, seawater, mineral oils, and other oils.
4) Good adhesion with proper primers, recoatable.
5) Good abrasion and scratch resistance.
Uses: Used as top coatings for top sides, water lines, and superstructures of ships; as protective top coatings for other metal structures and concrete; also can be used as water line refinish.
The high-chlorinated polyethylene coatings consists of high-chlorinated polyethylene, synthetic resin, plasticizer, pigments, additives and solvents. The aluminum type is a 2K system and the others are 1K systems. This coatings shows excellent weatherability, industrial corrosion protection, and resistances to acids, alkali, and salts. The coatings film dries quickly, and features good color and gloss retentions, good mechanical properties, and brilliant colors, which are suitable for corrosion protection indoor or outdoor steel structures, and concrete.
Composition: Consists of silicone resin, special additives, heat resistant and anticorrosive pigments, and curing agents. The grades of 250℃and 400℃ are 2K systems, and the grade 500℃ is a 3K system.
Advantages:
1) Excellent adhesion between primer and topcoat;
2) Air dry and fast dry;
3) Excellent corrosion and chemical atmosphere protection;
4) Good weather, water and moisture resistance;
5) Good decorative and electric insulation properties.
Uses: Used for exterior protection of hot air oven and furnace; also can be used for protection of chimney, fume pipes, exhausters, hot air pipes, heating ovens, heat exchangers, etc.
Phenolic coatings consists of refined dry oils, modified phenolic resin, antirust pigments, solvents and driers.
The phenolic coatings features fast dry, hard and glossy films, and good water resistance. It can be used for antirust primer of ships above waterlines. Phenolic coatings also shows resistances to chemicals and good insulation; the top coatings features light fast, abrasion and wet/dry alternation resistance.
Composition: Consists of partly hydrolyzed alkyl silicate solution, ultra-fine zinc powder, thickener, fillers, additives and solvents, which is a two-component system.
Characteristics:
1) Fast dry
It can be dried within 5 min. when sprayed on production line. The film has good mechanical property.
2) Weatherability and corrosion protection
It provides inorganic zinc electrochemical protection, and can be last for 6-12 months if film thickness around 20 μm.
3) Used for various production lines
The inorganic zinc shop primer can be applied at ambient temperature or gentle heating condition, which is suitable to the different climates in China and various facilities in different factories.
4) Weld Ability and Heat Resistance
No affecting on welding process and quality when welded, and good heat resistance and small damage area during heat process.
WH06-1-1 water-based epoxy zinc-rich primer
WH53-3 water-based epoxy black primer
WH53-5 water-based epoxy iron red primer
WH53-6 water-based epoxy mica iron rust-proof paint
WH53-8 water-based epoxy phosphate iron red primer
SB53-12 water-based acrylic iron red primer
SC06-1 water-based alkyd prime
SC53-34 water-based alkyd mica iron rust-proof paint
SH06-2 water-based epoxy ester primer
SB52-12 water-based acrylic top coating
SC04-42 water-based alkyd enamel paint
WBS52-12 water-based acrylic polyurethane top coating
WBS918 water-based acrylic polyurethane primer-finish coating
WH998 water-based epoxy primer-finish coating
WH52-2 water-based epoxy primer
Water-based acrylic primer-finish coating
Water-based amino paint
